9 steps of bathroom cabinet production process

1. Pick:

2. Cut:

3. Grinding:

4. Drilling:
Use a variety of professional tools such as professional precision bench drills to pre-drill structural installation holes in wood. The second process is professionally designed to ensure that no installation holes can be seen on the surface of the installed bathroom cabinet.
5. fight;
Imported raw materials are generally about 1000*60*20MM wooden strips. To make the side panels, door panels, bottom panels and other parts of the bathroom cabinet, you must go through the process of "putting together". , First of all, the selected and polished wood of the same size is placed side by side on a specific mold, and the splicing board is coated on the parts that need to be spliced, and then pressurized and fixed from all sides and up and down with professional fixtures at the same time, keeping it above 24 hours Yes; at the same time, in the process of assembly, if there is a large surface such as the bottom plate, professional engineers will calculate and slot it according to the stress area and expansion and contraction coefficients to prevent the cabinet body from deforming in the future (principle: the joints of the rails and grooves in concrete pavements).
6. Toss:
The assembled cabinet boards are polished many times with a professional polishing machine. The polishing machines include flat polishing machines, special-shaped polishing machines, spherical polishing machines, irregular polishing machines and manual polishing machines for processing wood of different shapes. There are special classifications of initial polishing and fine polishing in the polishing machine, and the polishing wheels used have the difference in thickness and material, and their functions are:



D. Polish along the wood grain to make the wood texture more three-dimensional;

7. Cut:

8. Paint:
The professional polyester paint is used to ensure that it is insect-proof and waterproof in terms of use requirements; unique and generous colors are a key to maintaining high-grade in the market. It is divided into primer and topcoat, which needs to be applied four times in total. The function of primer is to seal the wood pores, fix the color, and remove small wood thorns; the topcoat can be applied after the primer is dry, and the final performance of the topcoat The color of the cabinet is also waterproof and insect-proof. It takes a long time to paint. For the sake of personal quality, the painting process cannot be simplified to shorten the production time. Therefore, the painting process of a set of bathroom cabinets takes more than 3 days. The paint workshop has strict operating procedures, especially the finish paint workshop. Because the top coat is assembled after drying, it is required that there should be no dust in the workshop. All workers in the finish paint workshop must wear masks.
9. Install:
Assemble the paint-dried parts on a professional installation table, and check whether there are any problems with the size, installation, and paint of the cabinet. After the assembly is completed, wrap it in plastic wrap and pack it in a box, and use large-sized wooden strips outside the carton box fixed.